+86-135-2862-7820

Space-Saving Commercial Dishwasher: CHINENG 8038 Series — Undercounter, Sliding-Hood & Custom-Fit, 1.5–18 kW

2026-07-01


Space-Saving Commercial Dishwasher: CHINENG 8038 Series — Undercounter, Sliding-Hood & Custom-Fit, 1.5–18 kW

CHINENG Commercial Kitchen Equipment  |  June 2026  |  5 min read

 

  Table of Contents

  1. Six Sub-Series: One for Every Kitchen Constraint

  2. Undercounter Models — Fits Under the Countertop

  3. Compact & Sliding-Hood — For Tight Spaces

  4. High-Output Models — Noodle Shops & Dual Baskets

  5. Premium Dual-Pump Flagship

  6. FAQ

  7. Request a Quotation

 

Not every kitchen has the floor space for a standard hood-type dishwasher. Narrow alley kitchens, undercounter setups, low-ceiling basements — standard 710 mm-wide machines simply do not fit. The CHINENG 8038 series solves this with six purpose-built form factors: from a 600 mm-wide undercounter unit to an 18 kW dual-basket workhorse, every model is engineered around a specific space or capacity constraint.

1. Six Sub-Series at a Glance

Sub-Series

Power Range

Key Feature

Dimensions (mm)

Best For

Undercounter (SKJ)

1.5–2 kW

Embedded, built-in detergent dispenser

600×628×820

Under-counter installation, bars, cafés

Compact (TXJD)

5–12 kW

One-key drain, ultra-narrow 620 mm width

620×630×1,160

Height- & width-limited kitchens

Sliding-Hood (DL)

7–9 kW

Sliding hood — no overhead clearance needed

660×655×1,350

Low-ceiling kitchens, basement setups

Noodle-Shop (FM-JD)

12–15 kW

Larger basket (60×60 cm), 30% more capacity

780×880×1,435

Noodle shops, high-volume small kitchens

Dual-Basket (DB)

18 kW

Double basket, double throughput

1,270×830×1,380

Peak-hour restaurants, 300+ covers

Flagship (JGS-CX1)

7–12 kW

Dual pump, premium build

680×780×1,355

Mid-size restaurants, quality-first

 

2. Undercounter Models — Fits Under the Countertop

The SKJ series is the most compact commercial dishwasher in the CHINENG range. At just 600×628×820 mm, it fits under a standard countertop — ideal for bars, cafés, and small kitchens where every square centimetre counts. Built-in detergent dispenser eliminates manual dosing.

Model

Power

Voltage

Dimensions (mm)

Weight

CN-8038-SKJ-220/1.5

1.5 kW

220 V

600×628×820

78 kg

CN-8038-SKJ-220/2

2 kW

220 V

600×628×820

78 kg

 

Both models include one dish rack and water hoses as standard.

3. Compact & Sliding-Hood — For Tight Spaces

TXJD: Ultra-Narrow at 620 mm

Five models from 5 to 12 kW. Only 620 mm wide — fits through narrow doorways and into tight galley kitchens. One-key automatic drain simplifies end-of-shift cleanup. 220 V and 380 V options available.

DL: Sliding Hood — No Lifting Required

Three models. The hood slides horizontally instead of lifting vertically — designed for kitchens where ceiling height is restricted. Only 1,350 mm total height. 7 kW and 9 kW power ratings. Includes one rack and water hoses.

Model

Power

Voltage

Dimensions (mm)

Weight

CN-8038-DL-220/7

7 kW

220 V

660×655×1,350

102 kg

CN-8038-DL-380/7

7 kW

380 V

660×655×1,350

102 kg

CN-8038-DL-380/9

9 kW

380 V

660×655×1,350

102 kg

 

4. High-Output Models — Noodle Shops & Dual Baskets

FM-JD: Purpose-Built for Noodle Restaurants

Two models, both 380 V. Larger 60×60 cm basket accommodates oversized noodle bowls and deep plates — approximately 30% more capacity per cycle than standard hood-type machines.

Model

Power

Dimensions (mm)

Weight

CN-8038-FM-JD-12

12 kW

780×880×1,435

120 kg

CN-8038-FM-JD-15

15 kW

780×880×1,435

120 kg

 

DB: Dual Basket — Double the Throughput

The largest single-unit hood-type dishwasher in the 8038 range. Two independent baskets run simultaneously — effectively doubling throughput per cycle. 18 kW heating for rapid temperature recovery. Dimensions: 1,270×830×1,380 mm.

5. Premium Dual-Pump Flagship (JGS-CX1)

Four models — the premium tier of the 8038 range. Dual-pump system for consistent water pressure across both spray arms. Compact 680×780×1,355 mm footprint with 7/9/12 kW options across 220 V and 380 V.

Model

Power

Voltage

Dimensions (mm)

CN-8038-JGS-CX1B

7 kW

380 V

680×780×1,355

CN-8038-JGS-CX1D

7 kW

220 V

680×780×1,355

CN-8038-JGS-CX1

9 kW

380 V

680×780×1,355

CN-8038-JGS-CX1F

12 kW

380 V

680×780×1,355

 

6. FAQ

Q: What makes the 8038 different from the 8001 series?

The 8001 series is a standard hood-type dishwasher for general use. The 8038 series offers specialised form factors: undercounter (SKJ), sliding-hood for low ceilings (DL), ultra-narrow (TXJD), oversize basket (FM-JD), and dual-basket (DB). Choose 8001 for standard kitchens; choose 8038 when you have a specific space or capacity constraint.

Q: Which model for a bar or café with limited space?

The SKJ undercounter series — 600 mm wide, fits under a standard countertop. Built-in detergent dispenser. For establishments that primarily wash glasses, cups, and small plates.

Q: What is the sliding-hood (DL) and when is it needed?

Standard hood-type dishwashers require overhead clearance to lift the hood vertically. The DL series slides the hood horizontally — ideal for low-ceiling kitchens, basements, or any installation where vertical clearance is below 1,500 mm.

Q: Can the dual-basket DB model run as two independent washers?

Yes. The dual-basket design allows two baskets to be washed simultaneously in independent compartments. This effectively doubles throughput during peak hours without requiring a second machine.

7. Request a Quotation

From a 600 mm undercounter unit to an 18 kW dual-basket system, the CHINENG 8038 series provides a purpose-built dishwasher for kitchens where standard machines simply do not fit.

  Contact CHINENG for commercial pricing and a space assessment

   Sales enquiries: +86 135-2862-7820

 

  Related Articles

  Conveyor Dishwasher Selection Guide: The Ultimate Solution for High-Volume Canteens & Chain Restaurants

  Hood-Type Dishwasher Deep Dive: Why the CHINENG 8001 Is the Smart Choice for Mid-Size Kitchens

  Why Do We Need Commercial Dishwashers?

 

© 2026 CHINENG Commercial Kitchen Equipment  |  www.en.dgjscn.com


Price transparency

Nationwide coverage

Rapid design

Quick quote

Worry-free after sale

Guangdong Jiushang Electronic Technology Co., Ltd.

+86-400-0622-168

Mobile: +86-135-2862-7820

Contact: Manager Liu

Address: Building 5, Huyue Bay Area, Humen Town, Dongguan City, Guangdong Province, China

Copyright © Guangdong Jiushang Electronic Technology Co., Ltd. All Rights Reserved.

CHINENG

TikTok YouTube WhatsApp Wechat E-catalog
TOP